Select Currency:
01803 295430
sales@spwales.com
The Carlo Gavazzi - EM23-DIN.AV9.3.X.01.P/F.BP is a very simple, compact, easy to install energy meter. This meter has been MID approved so it may be used for billing applications. It is only 4 modules wide and mounts onto a DIN Rail and has a neat joystick built into it for easy configuration and parameter selection, and an LCD display. This meter provides a moderate level of detail and is very easy to navigate. It is highly recommended for applications where non/semi-technical staff need to read the unit.
The Carlo Gavazzi - EM23-DIN.AV9.3.X.01.P/F.BP is a very simple, compact, easy to install energy meter. This meter has been MID approved so it may be used for billing applications. It is only 4 modules wide and mounts onto a DIN Rail and has a neat joystick built into it for easy configuration and parameter selection, and an LCD display. This meter provides a moderate level of detail and is very easy to navigate. It is highly recommended for applications where non/semi-technical staff need to read the unit.
This meter measures a variety of parameters, including individual Line Current (I), Reactive Power (VAr), Power (W), Energy (KWh) and Reactive Energy (VArh). This meter will also display a warning if the wiring is incorrect.
It also comes with a pulsed output which is proportional to the active energy (KWh) used.
N.B. This meter can be pre-wired into an enclosure. Click here to see our full range of Enclosures, or click here to find out more about our Pre-Wiring Service.
| Meter Type | Three Phase | ||
| Fitting Type | DIN Rail | ||
| Max Current (amps) | 65 | ||
| MID Approved | Yes | ||
| Smart | No | ||
| Input Type | Direct Connect | ||
| Output Type | Pulse | ||
| Tariffs | Single | ||
| Import / Export | Import Only | ||
| Availability | Next Day | ||
| Condition | New | ||
| Brand | Carlo Gavazzi | ||
| Country of Manufacture | Italy | ||
| MEASURED PARAMETERS | |||
| Active Energy (kWh) | Line Power Factor (PF) | ||
| Active Power (W) | Line Reactive Power (kVAr) | ||
| Apparent Energy (kVAh) | Line to Line Voltage (V) | ||
| Apparent Power (VA) | Line to Neutral Voltage (V) | ||
| Average Current (I) | Maximum Current (I) | ||
| Average Power Demands (W) | Maximum Power Demands (W) | ||
| Average Voltage (V) | Maximum Voltage (V) | ||
| Current (I) | Power Factor (PF) | ||
| Current in Neutral (I) | Reactive Energy (kVArh) | ||
| Frequency (Hz) | Reactive Power (VAr) | ||
| Hours Run (hr) | Total Harmonic Distortion (Amps) | ||
| Line Active Power (W) | Total Harmonic Distortion (Volts) | ||
| Line Apparent Power (kVA) | Voltage (V) | ||
| Line Current (I) | |||
The Carlo Gavazzi - EM23-DIN.AV9.3.X.01.P/F.BP is a very simple, compact, easy to install energy meter. This meter has been MID approved so it may be used for billing applications. It is only 4 modules wide and mounts onto a DIN Rail and has a neat joystick built into it for easy configuration and parameter selection, and an LCD display. This meter provides a moderate level of detail and is very easy to navigate. It is highly recommended for applications where non/semi-technical staff need to read the unit.
This meter measures a variety of parameters, including individual Line Current (I), Reactive Power (VAr), Power (W), Energy (KWh) and Reactive Energy (VArh). This meter will also display a warning if the wiring is incorrect.
It also comes with a pulsed output which is proportional to the active energy (KWh) used.
N.B. This meter can be pre-wired into an enclosure. Click here to see our full range of Enclosures, or click here to find out more about our Pre-Wiring Service.
| Meter Type | Three Phase | ||
| Fitting Type | DIN Rail | ||
| Max Current (amps) | 65 | ||
| MID Approved | Yes | ||
| Smart | No | ||
| Input Type | Direct Connect | ||
| Output Type | Pulse | ||
| Tariffs | Single | ||
| Import / Export | Import Only | ||
| Availability | Next Day | ||
| Condition | New | ||
| Brand | Carlo Gavazzi | ||
| Country of Manufacture | Italy | ||
| MEASURED PARAMETERS | |||
| Active Energy (kWh) | Line Power Factor (PF) | ||
| Active Power (W) | Line Reactive Power (kVAr) | ||
| Apparent Energy (kVAh) | Line to Line Voltage (V) | ||
| Apparent Power (VA) | Line to Neutral Voltage (V) | ||
| Average Current (I) | Maximum Current (I) | ||
| Average Power Demands (W) | Maximum Power Demands (W) | ||
| Average Voltage (V) | Maximum Voltage (V) | ||
| Current (I) | Power Factor (PF) | ||
| Current in Neutral (I) | Reactive Energy (kVArh) | ||
| Frequency (Hz) | Reactive Power (VAr) | ||
| Hours Run (hr) | Total Harmonic Distortion (Amps) | ||
| Line Active Power (W) | Total Harmonic Distortion (Volts) | ||
| Line Apparent Power (kVA) | Voltage (V) | ||
| Line Current (I) | |||
Planning a large project or looking to become a regular customer?
Let us know the product or products you require along with quantities, and we'll get in touch with our best price.
